|
|
Choose from thousands of our pool and spa products.
| |
| S.R. Smith Recall Stanchion |
| Mail this page to a friend. |
 Return to category page
|
|
|
|
| |
| Manufacturer: |
| S.R. Smith |
| Description: |
Recall Stanchion:
▪ Wall Thickness: .065, .109" or .145"
▪ Stainless Steel: 1.90" Stainless Steel
▪ Optional: Anchors and Escutcheons
|
| Notes: |
These are Deck Mounted Commercial Recall Stanchion 
of a standard height and length which runs generally parallel with an angle typical of pool steps. With proper anchor devices, it is suitable for use on stairs and slopes on poured concrete, shotcrete, fiberglass and vinyl Commercial pools, spas as well as for other applications in most geographic areas. In addition and with the proper anchor sockets and a secure mounting, this unit can be surface-mounted for light to moderate duty.
Features and Benefits:
▪ Backstroke— Perfect to suspend backstroke flags over competition pools
▪ Crowd Control— Available in 1,2 or 4 eyebolts for lines, ropes or pennants
▪ Deluxe Crowd Control— Comes with additional anchor assembly for superior strength
▪ Recall— Stands 4ft above the deck to suspend false start ropes over competition pools
General Notes:
The 4’–6”Recall Stanchion is made of polished type 304 stainless steel and an eyebolt is attached to the top of the stanchion to affix rope. When anchored properly, the Recall Stanchion stands 4’-0” (1.22m) above deck level.
Application:
The stanchion can be used to suspend a false start rope over competition pools in most geographic areas.
Specifications:
1. Body: The body of the stanchion is made of 1.90” O.D. (48.3mm) type 304 polished stainless steel tube. The body is available in wall thicknesses of .065”, .109, or .145 (1.65mm, 2.77, or 3.68).
2. Eyebolt: A stainless steel eyebolt is welded to an end cap, which is welded to the body. The eyebolt outer diameter is a nominal 2” (50.8mm) and the inner diameter is a nominal 1.25” (31.8mm). An additional stainless steel collar band with eyebolt and control knob can be ordered separately, for adjustable line heights (p/n 35-102).
3. Anchor Assembly (Optional): (p/n AS-100D, see spec sheet for SRS-916): The anchor socket is made of cast bronze and is 6” (152.4mm) deep, allowing for mounting without the use of a wedge assembly. The anchor is tapped for the provided 1/4-20 UNC brass grounding screw. Brass caps are provided to mount flush with the deck when the fixture is removed.
▪ Click for Written Specification
|
| |
| Shipping: Free Shipping |
|
|
|
|
|
|
|
Specials | Pool Guide | Pool Sites | Return Request
Fax 1-800-591-6709
