|
|
Choose from thousands of our pool and spa products.
| |
| SR Smith, Portable Lifeguard Stand |
View Full Image |
|
|
| Description: |
Portable Lifeguard Stand:
▪ Footboard: 38 W x 42 L
▪ Seat: Fiberglass with 45° Swivel Seat
▪ Treads: Three, Stainless Steel
▪ Height: 6ft
▪ Weight: 150 lbs
▪ Click for Brochure |
| Notes: |
For over 70 years, S.R. Smith has created superior deck equipment for swimming pools. We create the most innovative diving towers and stands for commercial pools. From Deluxe 1
and 3 Meter towers to Steel Meter diving stands and diving framesS.R. Smith has the diving tower or stand you need.
Features and Benefits:
▪ Easy to place and move anywhere around pool area.
▪ Extended Observation Platform with Swivel Seat for better vision.
▪ Umbrella Support Stand for shade.
▪ 1.9" x .065 wall, 304 steel for commercial support.
General Notes:
The Portable Lifeguard Stand has an extended observation platform (footboard) and umbrella support intended for use at temporary, semi-permanent and permanent sites.
Application:
Depending upon installation design, local codes, and site requirements, this model is suitable for use on both commercial and competition pools. In addition, these stands are well suited for use as judging and observation stands on tennis courts and other sporting sites, especially those where permanent installation is not required.
Specifications:
1. Footboard: The observation platform (footboard) of the Portable Lifeguard Stand measures
1-5/8 x 18 x 42 (41.4mm x 457.2 x 1066.8) and is a solid laminated fir core covered with fiberglass reinforced acrylic.
2. Steps: Three (3) steps are mounted to the frame. The steps are constructed of polished 304 stainless steel with nominal dimensions of 3 x 20 (76.2mm x 508). The step frames have replaceable, black, non-skid tread inserts.
3. Frame: The uprights of the stand mount to three polished 1.90 O.D. x .065 wall (48.25mm x 1.65) type 304 stainless steel tubes which have been welded together to form a base. The front and rear sections are fitted with a total of four (4) 10 (254mm) long Fulcrum Covers, which add stability and absorb shock. The rear base section is fitted with wheels on either side to facilitate movement of the stand. The uprights of the stand are constructed of 1.90 O.D. x .065 wall (48.25mm x 1.65) type 304 stainless steel with bends formed on 6 (152.4mm) radii.
4. Swivel Stand w/ Umbrella Holder: The base column of the swivel stand assembly is constructed of 1.90 O.D. x .065 wall (48.25mm x 1.65) type 304 stainless steel. At the lower end of the column is affixed a .25 (6.4mm) stainless steel plate which serves as a mounting flange. This flange is attached in tandem with the observation platform (footboard) to the platform supports. A 1.90 O.D. x .065 wall (48.25mm x 1.65) type 304 stainless steel tube is bent and affixed to the rear of the seat base column and serves as an umbrella holder.
5. Seat w/ Swivel: A special swivel mechanism is attached to the upper end of the swivel stand base column to allow for an approximate 45° rotation of the contoured, low-side fiberglass seat.
▪ Click for Written Specification
▪ Click for Installation Instructions
|
| |
| Catalog Number: PLS-204 |
| Shipping: Free Shipping |
|
|
|
|
|
Specials | Pool Guide | Pool Sites | Return Request
Fax 1-800-591-6709
)
