|
|
Choose from thousands of our pool and spa products.
| |
| Therapeutic Bars without Flanges |
| Mail this page to a friend. |
 Return to category page
|
|
|
|
| |
| Manufacturer: |
| SR smith |
| Description: |
SR Smith Therapeutic Bars without Flanges:
▪ Outside Diameter: 1.90"
▪ Lengths: 48" and 88" or custom sizes
▪ Wall Thickness: .065,
▪ Stainless Steel: 304 |
| Notes: |
These are Deck Mounted Commercial Therapeutic Bars 
of a standard height and length which runs generally parallel with an angle typical of pool steps. With proper anchor devices, it is suitable for use on stairs and slopes on poured concrete, shotcrete, fiberglass and vinyl Commercial pools, spas as well as for other applications in most geographic areas. In addition and with the proper anchor sockets and a secure mounting, this unit can be surface-mounted for light to moderate duty.
Features and Benefits:
▪ Ideal for facilities offering physical therapy and exercise courses
▪ Bars extend approximately 4” from wall for easy gripping
▪ Available with and without flanges to conform with any pool construction
▪ Flanges features 3/8” inward bend for form smooth, even point for flat surface mounting.
General Notes:
The Commercial Therapeutic/Exercise Bars without Flanges are constructed from polished stainless steel. Anchors are purchased separately to secure the bar to the pool wall. These bars are available in overall lengths of 48” and 88” (1219mm and 2235 mm) and special order rails in alternate lengths are also available.
Application:
These units are intended for use at commercial and competitive installations as exercise, training, and therapeutic rails where a 1.90” (48.3mm) diameter bar is desired. The rails can be used in most geographic areas.
Specifications:
1. Bar Assembly: These exercise bars are constructed from a 1.90” O.D. x .065 wall (48.3mm x 1.65) type 304 polished stainless steel main tube. Stainless steel end caps are continuously welded to the ends of the main tube to prevent corrosion. 1.90” O.D. x .065 wall (48.3mm x 1.65) mounting posts welded to the main tube allow for a nominal clearance of 3.0” (76.2mm) between the main tube and the pool wall when used with an appropriate anchor.
2. Escutcheon (Optional): (p/n EP-100F) The round escutcheon plate is 4.5” (114.3mm) in dia. and is stamped of .023” (58mm) polished, type 304 stainless steel. The escutcheon is raised .67” (17.0mm) beyond the pool wall.
3. Anchor Assembly: (p/n IAS-100, see spec sheet for SRS-913): These recommended anchor sockets are bronze castings. They are intended for heavy-duty commercial use and fixtures secure by means of a wedge assembly. A 1/4-20 UNC brass grounding screw is included. Alternative anchor assemblies include p/n AS-100B (see spec sheet for SRS-908). Anchors are purchased separately.
▪ Click for Written Specification Commercial Therapeutic/Exercise Bars without Flanges
|
| |
| Shipping: Free Shipping |
|
|
|
|
|
|
|
Specials | Pool Guide | Pool Sites | Return Request
Fax 1-800-591-6709
