SR Smith Therapeutic Bars with Flanges: All mounting hardware is included. ▪ Outside Diameter: 1.90"
▪ Lengths: 48" and 88" or custom sizes
▪ Wall Thickness: .065, ▪ Stainless Steel: 304
Notes:
These are Deck Mounted Commercial Therapeutic Bars of a standard height and length which runs generally parallel with an angle typical of pool steps. With proper anchor devices, it is suitable for use on stairs and slopes on poured concrete, shotcrete, fiberglass and vinyl Commercial pools, spas as well as for other applications in most geographic areas. In addition and with the proper anchor sockets and a secure mounting, this unit can be surface-mounted for light to moderate duty.
Features and Benefits: ▪ Ideal for facilities offering physical therapy and exercise courses
▪ Bars extend approximately 4” from wall for easy gripping
▪ Available with and without flanges to conform with any pool construction
▪ Flanges features 3/8” inward bend for form smooth, even point for flat surface mounting. General Notes:
The Commercial Therapeutic/Exercise Bars with Flanges are constructed from polished stainless steel. Flanges are included to mount the bar to the pool wall. All mounting hardware is included. These bars are available in overall lengths of 48” and 88” (1219mm and 2235 mm) and special order rails in alternate lengths are also available.
Application: These units are intended for use at commercial and competitive installations as exercise, training, and therapeutic rails where a 1.90” (48.3mm) diameter bar is desired. The rails can be used in most geographic areas.
Specifications: 1. Bar Assembly: These exercise bars are constructed from a 1.90” O.D. x .065 wall (48.3mm x 1.65) type 304 polished stainless steel main tube. 1.90” O.D. x .065 wall (48.3mm x 1.65) mounting posts welded to the main tube allow for a nominal clearance of 3.0” (76.2mm) between the main tube and the pool wall. Stainless steel end caps are continuously welded to the ends of the main tube to prevent corrosion.
2. Flange: The included flanges are made from .117” thick (2.97mm) type 304 polished stainless steel. They measure 4.42” (112.3mm) in diameter and raise .41” (10.4mm) beyond the wall. The flanges are drilled to accept three (3) included 3/8-16 UNC mounting bolts.
▪ Click for Written Specification